FCC COLEMAN, REPLACE SPRINKLER SYSTEM at FOOD SERVICE WAREHOUSE PROJECT 3D6F

arge@bop.gov. The Federal Bureau of Prisons (FBOP), Federal Correctional Complex, Coleman, Florida (FCC Coleman) located at 846 NE 54th Terrace, Coleman, Florida in Sumter County intends to make a single award to a responsible entity that will provide all necessary labor and incidentals to remove existing and install a new wet, fire suppression system at the Food Service Warehouse which complies with NFPA 25 and all other applicable codes and standards. This contract will consist of install/labor only. All materials needed are already on site. Work hours shall be between the hours of 6:30 AM and 03:30 PM, Monday through Friday, except Saturdays, Sundays, and Federal holidays. Contractor�s pricing shall include labor costs for the weekend work hours. Due to the work involved for this project, it could be beneficial for the Contractor to work �off shifts� (after 3:00 PM and before 6:00 AM). While the off shifts are not required, the FBOP is open to discussing this option should it be beneficial to the Contractor and the FBOP. Bids which identify additional costs for weekend work hours or �off shift� work hours will be rejected. Should the Contractor need to access the site to conduct work associated with this contract at a time other than those listed above, the Contractor will request an alternate time in writing to the COR five (5) working days prior to the date and time requested. Parts on site, already purchased from the FBOP are the following. 252 FT. of 4� galvanized, beveled ends (BE) A53B schedule 40, electric resistance welded (ERW), Single Random Lengths (SRL) pipe in 21� lengths. 441 FT. of 2-1/2� galvanized A53B schedule 40, SRL, BE, welded carbon steel (WCS) pipe in 21� lengths. 1092 FT. of 1-1/2� galvanized, A53B, schedule 40, SRL, BE, WCS pipe in 21� lengths. 273 FT. of 1-1/4� galvanized, A53B, schedule 40, SRL, plain end (PE), WCS pipe in 21� lengths. 336 FT. of 1� galvanized, A53B, schedule 40, SRL, plain end (PE), WCS pipe in 21� lengths. 90 ea. of 1-1/2� X 1-1/2� X 1� FNPT, schedule 40, standard 150# galvanized malleable iron tee. 30 ea. of 1-1/2� X 1-1/4� X 1� FNPT, schedule 40, standard 150#, galvanized malleable iron tee. 200 ea. of 1� X 1� X �� threaded X NPS, standard 150# galvanized malleable iron reducing tee. 250 ea. of 1-1/2� X 1-1/2� X1/2� FNPT, schedule 40, standard 150#, galvanized malleable iron tee. 60 ea. of 1-1/2� X �� FPT, standard 150#, galvanized, malleable iron 90-degree elbow. 100 ea. of 1-1/2� threaded, standard 150#, galvanized malleable iron 90-degree elbow. 60 ea. of 1� FNPT, standard 150#, galvanized malleable iron 90-degree elbow. 200 ea. of �� MNPT, standard 150#, cored square head, galvanized cast iron plug. 24 ea. of 4� Victaulic, firelock style 002, grooved, 365 psi, hot dipped, galvanized, ductile iron with tee plastic gasket. 24 ea. of 4� X �� Victaulic, grooved, 365 psi, hot dipped, galvanized, concentric reducer. 24 ea. of 4� Victaulic, firelock style 005, grooved, 365 psi, hot dipped, galvanized, rigid coupling. 12 ea. of 4� Victaulic, firelock style 002, grooved, 365 psi, hot dipped, galvanized, ductile iron with tee plastic gasket. 24 ea. of 4� X �� Victaulic, grooved, 365 psi, hot dipped, galvanized, concentric reducer. 24 ea. of 4� Victaulic, firelock style 005, grooved, 365 psi, hot dipped, galvanized, rigid coupling. 108 ea. of 1-1/2� Victaulic, firelock style 005, grooved, galvanized, rigid coupling. 60 ea. of 4� Victaulic, firelock style 005, grooved, hot dipped, galvanized, rigid coupling. 60 ea. of 2-1/2� Victaulic, fire lock style 002, grooved, hot dipped, galvanized, ductile iron with tee plastic gasket. 60 ea. of 2-1/2� X 1-1/2� Victaulic, grooved, 365 psi, hot dipped, galvanized, concentric reducer. 60 ea. of 2-1/2� Victaulic, fire lock style 002, grooved, hot dipped, galvanized, rigid coupling. 120 ea. of 2-1/2� Victaulic, fire lock style 002, grooved, hot dipped, galvanized, rigid coupling. 1002 FT. of 3/8� X 6�, zinc plated all thread rod. 450 ea. of 3/8� pre-galvanized steel top mount stamped beam clamp. 100 ea. of model 115 1� X 3/8� pre-galvanized steel loop hanger. 250 ea. of model 115 1-1/2� X 3/8� pre-galvanized steel loop hanger. 60 ea. of model 115 2-1/2� X 3/8� pre-galvanized steel loop hanger. 30 ea. of 4� steel adjustable swivel ring hanger. 100 ea. of 3/8� zinc rod coupling. 200 ea. of RIDGID ductile iron and steel cutting wheel Additional parts may be present.