W9127N26QA145 - PH2 BLADE SEALS REPLACEMENT for Bonneville Dam
Army Corps of Engineers · W071 ENDIST PORTLAND
Capture briefs (a one-page, shareable copy of this page) are part of Pro. The CSV here holds the notice, its timeline and past awards.
Where this opportunity stands
Every notice posted under solicitation W9127N26QA145 in this department, oldest first.
Next steps for this stage
Standard steps for the notice type; not advice about this buyer.
- Decide bid or no bid before the response deadline.
- Look at the past winners for likely competitors and teaming partners.
- Follow the opportunity to hear about amendments and the award.
What the notice says
GENERAL STATEMENT US Army Corps of Engineers, Portland District, Bonneville Lock and Dam are soliciting for the purchase and installation of blade seals for Powerhouse II Main Unit Kaplan turbines. The turbine runners are 5-bladed vertical axis Kaplans. The contractor will supply and install turbine blade seals on the Kaplan turbine of Main Unit 16. The second set of blade seals for Unit 17 is optional, as defined in this Performance Work Statement. The contractor will provide seals based on drawings and dimensions provided by the Government. The Government requests expedited fabrication, deli… (show all)
very, and installation at the earliest practicable opportunity following contract award. The Government anticipates contract award on or about 9/30/2026. This date is for planning purposes only and does not alter the Contractors performance obligations, which begin upon contract award. PERFORMANCE STANDARDS AND GUIDELINE REQUIREMENTS The Contractor shall furnish all supervision, labor, equipment, materials necessary to perform the work required under these specifications except for those items specifically identified as government provided. The Contractor shall place all trash and litter pickup in dumpsters located on the project. Telephone service will not be provided. The Contractor will furnish, deliver, and install newly manufactured Kaplan blade seals and all accessories at Bonneville Lock and Dam as detailed in this PWS. Contractor shall also provide required documentation as stated in section 5.1.3 of this PWS. Description of Supply and Service Supply Turbine Blade Seals. The Contractor is responsible for designing and fabricating one-piece solid seals for five-bladed Kaplan turbine runners. The seals are required to have redundant sealing edges, no split, and field-molded solid at site. No gluing, cold bonding, or hotbonding using additional material are permitted. The seals will need to be bonded without any external additional material (adhesive or elastomer) to ensure identical material properties across the entire seal and geometric continuity of the seal edges. The nominal packing size will have an OD of 45.252-inch and an ID of 43.993-inch. The blade seals are original to the 1980s installation and final seal dimensions are to be verified prior to delivery and installation. Approximate dimensions are provided herein for pricing purposes only. The seal housing (turbine hub bore and turbine blade trunnion sleeve) dimensions will be confirmed prior to the supplier coming to site for installation. For compatibility with material selection, the outer surface the seal will be against is cast steel. The inner surface of the blade seal housing is stainless steel. The seals shall be designed to fit within the existing packing box dimensions as shown on the supplied reference drawings: Drawing Description Number 330 - 5 X A Runner Hub Assy Sect 4296-JL-1 Follower (Seal Ring) 6532-T-2 Runner Hub Assy Plan 4296-JO-1 Runner Hub Assy Plan 4296-JM-1 Blade 6530-CR-1 Runner Hub 6529-BB-1 ** See solicitation document for more details **
Who won similar work
3 award notices on SAM.gov in the last 24 months. Match: Same agency (Army Corps of Engineers), same NAICS 339991.
| Winner | Awards | Value | Last |
|---|---|---|---|
| WESTEX GROUP, INC | 1 | $110K | Sep 15, 2026 |
| B & H INTERNATIONAL LLC | 1 | $76K | Aug 27, 2025 |
| IRSA UMAR Glen Burnie MD 21060 USA | 1 | $56K | Feb 10, 2026 |
Value counts single-winner awards. "Shared" awards are multiple-award contracts that list every winner with the same total ceiling; that ceiling is not one company's win, so it is not added in.
- Sep 15, 2026WESTEX GROUP, INC$110KFort Randall Draft Tube Bulkhead Seals Replacement
- Feb 10, 2026IRSA UMAR Glen Burnie MD 21060 USA$56KBrand Name - Garlock 3760 Multiswell Gaskets
- Aug 27, 2025B & H INTERNATIONAL LLC$76KAlbeni Falls Dam Main Unit Turbine Blade Seals Replacement
Competitive landscape
For the 3 most frequent past winners above. Lobbying is matched by the company's exact name or exact ticker; agencies are as named on the filings.
- 0 of these past winners lobbied Army, Dept of (Corps of Engineers) or Army, Dept of (Other) or Natl Guard since 2024 (0 filings)
- 0 of their lobbyists list a past Army, Dept of (Corps of Engineers) or Army, Dept of (Other) or Natl Guard job
- No corporate PAC money from them to the overseeing committees since 2024
- 0 foreign-agent (FARA) registrations
Policy around it
Bills the past winners named while lobbying this agency's issues, rules from the department, and executive orders that name the agency, last 12 months.
- 0 bills named on the past winners' lobbying filings
- 32 rules from the department in the last 12 months
- 0 executive orders naming the agency in the last 12 months
Market
For past winners matched exactly to a listed company. Insider trades are open-market buys and sells (Form 4) in the last 90 days, shown as facts; our own study found insiders do not reliably buy ahead of awards.
- 0 of the past winners are listed companies
- 0 insider buys and 0 insider sells at them in the last 90 days
Sources: SAM.gov notices and award notices; Senate LDA lobbying filings; FEC filings; FARA; Federal Register; congress.gov; SEC Form 4. Every row above links to its record.
Companies are matched to tickers by exact name only. A company we could not match shows no market rows; that is a miss, not a finding.