36C24726Q0802 Amendment 0001

ion of Need lists an audio inserter but that is not in the requirements, please specify if an audio inserter is required. A6: Combining the audio feed from the sound board with the video feed from the camera is a requirement Q7: The Description of Need lists a digital camera, is the contractor to provide a camera? A7: Yes Q8: The Description of Need lists a HDMI switcher but that is not in the requirements, please specify if an HDMI switcher is required and if so how many inputs and outputs. A8: It is required. The switcher needs to support a minimum of 4 input channels Q9: The description of Need lists microphones but none are listed in the requirements, are microphones to be reused or is the contractor to quote microphones? A9: The existing microphones will be reused Q10: If microphones are requested to be provided, please specify how many, wired or wireless, and what type of wireless (i.e. handheld, lavalier, or head worn) A10: Not required Q11: If so, please specify if it needs to be a Pan-Tilt-Zoom (PTZ) camera or a professional/handheld camera? A11: PTZ Q12: If the customer requests a PTZ camera, do they want a control system to control the camera, HDMI switching, and audio from a wireless touch panel? A12: The camera needs to be controlled with a handheld remote Q13: If a control system is requested would the customer prefer to control volume from an iPad instead of a physical soundboard? A13: Control from a physical soundboard Q14: Is fiber distribution already in place for all rooms that the Fiber Command is to tie into? A14: No. Fiber optic cables will need to be installed to each Samsung television. Q15: If not please specify how many rooms and approximate distances required. A15: All monitors will be placed in the same room. Approximate distance is 75. Q16: Is the snake to be analog or digital? A16: Analog Q17: If analog, how long does the snake need to be? A17: Approximately 25' Q18: How is the snake to be ran? (i.e. in conduit, through basement, surface mount, through the ceiling) A18: Surface mount Q19: If digital, is there a CAT line already in place for use? A19: NA Q20: If cables need ran in the ceiling how high is the ceiling? A20: 30' Q21: Is it open rafters? A21: Yes Q22: Can we get a lift or scaffolding in to run cables or would a ladder work? A22: It is an open vaulted ceiling approximately Q23: Is the Fractal Audio AXE-FX III to be utilized for a guitar or as a digital signal processor? A23: It is to be utilized for 2 guitars and a base guitar and needs to be fully configured as part of the project. Q24: Is the contractor to provide mounts for the TVs or will those also be purchased by the customer? A24: Mounts should be provided by contractor Q25: How high are the TVs to be hung and on what type of wall? A25: One wall is cinder block and the other is sheetrock. Q26: If the contractor is to provide the TV mounts are they required to be full motion mounts? A26: Flat mounts are fine. Q27: Please provide a list of existing equipment that is to be reused. A27: The only existing equipment to be reused is the 4 existing microphones.