J063--Preventive Maintenance (PM) and Software Support Service for PACS and Surveillance in the San Diego VARO

ltiple switches in each stack), all with full POE wattage on all ports Access control system: 1. Make and model # of all equipment needed to be maintained - iSTAR Controllers, iSTAR Ultra Encrypted Controllers, PACS server (CCURE v3.00 CU03 software only), EntryPoint Slammer software, multiClass HID RP40 and HID pivCLASS RPK-H card readers and all associated licensing/SSA. Also, door hardware associated with the card readers (e.g., Strikes, REX sensors, door contacts, etc.). 2. System serial of CCURE - 9-19097 3. Total Number of Card Readers - San Diego and Moreno Valley locations have a total of 81 card readers. 4. Total Number of Controllers - 9 iSTAR controllers (various models) 5. Total number of Power Supplies - 7 power supplies The Statement of Work (SOW) identifies the categories of equipment to be maintained but does not state quantities for either location. Will the Government provide an equipment inventory, by location, that includes at minimum: Total controlled openings (doors), with card reader manufacturer, model, and quantity; Software House iStar controller quantity, model (Ultra, Ultra SE, Edge, Pro, or other), and current firmware version; Power supply quantity and model, standby battery quantity, and the date of the most recent battery replacement; Request-to-exit device and door position switch quantities; IP camera quantity by manufacturer and model, and the video management system to which each camera is licensed; Network video recorder quantity, model, channel count, and storage capacity; Server and client workstation quantity, with operating system and SQL Server version; Panel enclosure quantity and location. Surveillance system: Make and model # of all equipment needed to be maintained - American Dynamics VideoEdge NVR, Genetec NVR, Samsung SNV-6084r IP cameras, Axis M4215-LV IP cameras, Hanwha XND-6080RV IP camera, Victor v6.0 software and all associated licensing and SSA System serial of NVR or VMS: Sunroad NVR - Genetec 4LZJX04, MorVall NVR � � American Dynamics VideoEdge NV5010820186775 (SW version) Total Number of Camera - 33 IP cameras in San Diego and 10 IP cameras in Moreno Valley Total Number of POE switches - 7 switch stacks (one stack in each closet - multiple switches in each stack), all with full POE wattage on all ports Access� control system: Make and model # of all equipment needed to be maintained - � iSTAR Controllers, iSTAR Ultra Encrypted Controllers, PACS server (CCURE v3.00 CU03 software only), EntryPoint Slammer software, multiClass HID RP40 and HID pivCLASS RPK-H card readers and all associated licensing/SSA. Also, door hardware associated with the card readers (e.g., Strikes, REX sensors, door contacts, etc). System serial of CCURE - 9-19097 Total Number of Card Readers - San Diego and Moreno Valley locations have a total of 81 card readers. Total Number of Controllers - 9 iSTAR controllers (various models) Total number of Power Supplies - 7 power supplies The SOW names three video platforms: Genetec, victor, and VideoEdge NVR. Will the Government identify which platform or platforms are in service at each of the two locations, and confirm whether all three are actively used or whether any are legacy systems scheduled for retirement? San Diego: Genetec NVR Moreno Valley: VideoEdge NVR using Victor client for analytics (installed on PACS server). The SOW refers to an Entry Point (Slammer). Please identify the manufacturer, model, and quantity of this equipment. Clarify what the requirement to take all reasonable efforts to ensure software compatibility with security updates and patches from Microsoft on supported operating systems obligates the contractor to perform. EntryPoint Slammer is software using to integrate PIV card info directly into CCURE (PACS). Does the Moreno Valley location contain both a physical access control system and a closed-circuit television system, or only one of the two? If that space is leased, please confirm the security systems are Government-owned and Government-maintained rather than landlord-owned and landlord-maintained. Yes, the Moreno Valley location contains both a physical access control system and a closed-circuit television system (VideoEdge NVR with 10 IP cameras). The security system is Government-owned and Government-maintained. Will the Government provide the current license inventory for each software platform, including: C-CURE 9000 version, system ID, license tier or SKU, and number of Series P client licenses; Genetec Security Center version, and camera, door, and any module or analytic license counts; Victor and VideoEdge version or versions and associated license counts; Any additional licensed modules such as visitor management, intrusion integration, or badging. CCURE 9000 v3.00 CU03 Series Q serial: 9-19097 (license snapshot available upon request) Genetec Security Center v5.11.3.0, system ID: GSC-240229-899241 -33 cameras VideoEdge NVR NV5010820186775 (SW version) -10 cameras Victor Unified Client v6.0 Page 2 of 4 Please state the current expiration date of each manufacturer software support or maintenance agreement (C-CURE SSA, Tyco SSA, Genetec SMA, and any others). Are all agreements current and continuous through 18 September 2026? All agreements are current and continuous through September 18, 2026. If any agreement has lapsed, or will lapse prior to the start of the period of performance, will the Government bear the manufacturer s reinstatement, back-maintenance, or re-licensing charges, or is the offeror expected to include those charges in its quoted price? If the latter, please provide the lapse dates so that those charges can be quantified. No agreement lapses. Is the incumbent contractor the current dealer of record for the Genetec SMA and the C-CURE and Tyco SSAs? Transfer of dealer of record to a successor contractor requires manufacturer processing time. Please advise whether the Government will facilitate that transfer and by what date it must be complete. Yes, the incumbent contractor is the current dealer of record, and the Government will facilitate that transfer. The SOW directs the contractor to provide appropriate model and uplift information. Please clarify whether the Government intends for license version uplifts or tier upgrades to be priced within the quoted CLIN amounts, or whether uplift information is requested for informational purposes only. The Government only requires current licensing. If the installed version of C-CURE 9000, Genetec Security Center, or VideoEdge is at or beyond the manufacturer s end-of-support date, and restoring or maintaining support coverage requires a software version upgrade, is that upgrade within the scope of this contract? The software version upgrade is within the scope of this contract. Further to Question 11: if a required software version upgrade in turn requires an upgrade to the underlying server operating system, SQL Server version, or server hardware, is that infrastructure work within the scope of this contract, or will it be performed by the Government or under a separate contract action? The Government will cover the server upgrade. The SOW procures preventive maintenance and software support agreements, and separately establishes a service level agreement requiring four-hour on-site response for security emergencies and next-business-day response for all other calls. The price schedule a