6515--Surgical Lights

a swift and minimally disruptive solution that will upgrade the existing lighting system with modern, reliable alternatives, thereby extending the lifespan of the surgical lighting infrastructure.� � Provide all necessary labor, materials, and services to perform the following work at Olin E. Teague Medical Center OR: � Delivery, installation, and inspection of new Surgical Lights. To include but not limited to� any patch work and electrical� work; Provision of warranty for the new Surgical� Lights;� De-installation, mobilization, and disposal of existing surgical lights currently in use; and All work shall be performed with minimal disruption to hospital operations and � patient care, with little to no construction or downtime� required.� Follow level 4 requirements on PCRA/ICRA (see attached VHA ICRA-1.2)� All work is to be performed� in accordance with� applicable laws, regulations, and industry standards to include VA requirements and standards TECHNICAL REQUIREMENTS � a.� � All electrical equipment shall meet applicable national electrical codes and hospital electrical safety requirements (e.g., NFPA 70/99 where applicable) and be suitable for use in a surgical environment.� b.� Light� sources� shall� be designed for surgical task lighting, with low radiated� � � heat to surgical field and staff.� Clear maintenance and replacement strategy from� manufacturers.� Maximum input power per� lighthead� shall be specified, and overall system� shall� prioritize energy efficiency while meeting optical requirements.� Configuration shall match existing clinical and structural layout (e.g., single, double, or triple-head ceiling-mounted system with optional monitor/arm accessories), with full articulation for head, arm, and yoke.� Ceiling mounts and support structures shall be engineered to accommodate weight and torque of the complete system, with seismic and structural calculations as required by local code.� Intensity, color temperature, and pattern size shall be adjustable from both the sterile� lighthead� handle and a control panel.� Lightheads� shall be easily repositioned with one hand using sterile handles, with smooth, drift-free movement and stable positioning under normal use.� All exposed surfaces shall be smooth, cleanable, and resistant to hospital-grade disinfectants, with no exposed fasteners or dirt-trapping crevices in routine contact areas� Provide all applicable safety signage and barricades, according to ICRA standards (VHA Infection Control Risk Assessment for Construction, Renovation and Maintenance), applicable to OSHA, VHA and DOD regulations.� � Contractor shall� comply with� VHA DIRECTIVE 2004-012 and all VA Center Policy Memorandums, including but not limited to the following:� Protection of patients, visitors, and employees from traumatic injury, as well as occupational and facility associated infections. Compliance with OSHA and State construction safety regulations.� � Construction contracts require that the general contractor s on-site competent person have completed the OSHA 30-hour construction worker course and that all other general and sub-contractor s workers have completed the OSHA 10-hour construction worker course or other relevant competency training.� � The determination for training is based on the project hazards and complexity, State and Federal regulations and VA requirements. Verification of completion of training will be� required� prior to performing work. Required to� submit� a safety plan for VA review and approval prior to the performing work.� h. Compliance with EPA and State environmental regulations.� � 4.� Deliverables� Description By Rooms Quantity Single Lighthead with 35" Radial Arm Install Kit 3 with custom panels VERTICAL SUPPORT TUBE LFS FLAT SCREENUPPER 28" LCD Wall Control Adapter Plate 2 Single Lighthead with 35" Radial Arm VERTICAL SUPPORT TUBE LFS FLAT SCREEN UPPER 28" Adapter Plate 2 Dual Lightheads with 43" and 35" Radial Arms, Install Kit 3, with custom panels VERTICAL SUPPORT TUBE LFS FLAT SCREEN UPPER 28", VERTICAL SUPPORT TUBE LFS FLAT SCREEN UPPER 22 LCD Wall Control Adapter Plate 6 Single Lighthead with 35" Radial Arm VERTICAL SUPPORT TUBE LFS FLAT SCREEN UPPER 28 Adapter Plate 6 Dual Lightheads with 79" and 59" Radial Arms Install Kit 3, with custom panels VERTICAL SUPPORT TUBE LFS FLAT SCREEN UPPER 15" VERTICAL SUPPORT TUBE LFS FLAT SCREEN UPPER 9" LCD Wall Control Adapter Plate 1 Single Lighthead with Single 79" Radial Arm Vertical SUPPORT TUBE LFS FLAT SCREEN UPPER 16" Adapter Plate 1 Dual Lightheads with 35" and 27" Radial Arms Install Kit 2, with custom panels VERTICAL SUPPORT TUBE LFS FLAT SCREEN UPPER 28" VERTICAL SUPPORT TUBE LFS FLAT SCREEN UPPER 22" LCD Wall Control Adapter Plate 2 Dual Lightheads with 35" and 27" Radial Arms Install Kit 2, with custom panels VERTICAL SUPPORT TUBE LFS FLAT SCREEN UPPER 16" VERTICAL SUPPORT TUBE LFS FLAT SCREEN UPPER 10" LCD Wall Control 1 Services for Installation, Inspection, warranty, de-installation, mobilization, and disposal for each room 1 4.� This equipment must be able to perform the following functions for all the� � SPECIFIC INSTRUMENT REQUIRED:� Central Texas Veterans Health Care System,� Surgical Lights� for the Operating Room.� � � � � � � � � � � � � � � � � � � 5.� � If this is an item your business can provide, please respond to� this� Sources� � � � � � � � � � � � � � Sought� Notice� by 10:00 AM Central Time on Thursday Monday 16 April� � � � � � � � � � � � 2026.� � 6.� The intent of this notice is to� establish� sources to define the procurement� � � strategy (e.g.� set-aside, sole source, unrestricted) for a solicitation that VA intends to post soon. Interested contractors are requested to respond� in accordance with� the following: � � Where is the item manufactured, the VA is interested in� procuring� items� manufactured� in the United States. Provide City and State.� � If you have an existing GSA or VA, Federal Supply Schedule contract, include the contract details in your response.� � Please note that VA is particularly interested in� determining� the availability of Service Disable Veteran Owned Small Business/Veteran Owned Small Business or other Small Business manufacturers or authorized distributors that can provide this item. � � Respond to this notice if you can provide these products listed in the table in the background and requirement section above. In response, please cite your business size status. � � DISTRIBUTORS: You must provide proof that you are an authorized distributor. VA does not accept gray market items. � � Vendors are requested to� submit� estimated market research pricing with their responses. The estimated pricing will be considered when� determining� the procurement strategy for the future solicitation. (e.g., if CO� determines� that capable small businesses cannot provide fair and reasonable pricing, then the solicitation will not be set-aside). � � Responses should include:� � (1) Business Name � (2) Business Address � (3) Point of Contact � - Name � - Phone Number � - E-mail Address � (4) SAM UID Number � (5) NAICS code � (6) Business Size: SMALL or LARGE � (7) Type of Business: SERVICE-DISABLED VETERAN OWNED (SDVOSB), VETERAN OWNED(VOSB), 8A, HUBZone, WOMAN-OWNED (WOSB), etc. � (8) Letter� stating� OEM authorized dealer, authorized distributor, or authorized reseller for the proposed equipmen