CNB Serving Lines
Army Mission and Installation Contracting Command (MICC) · W6QM MICC-FT DRUM
Capture briefs (a one-page, shareable copy of this page) are part of Pro. The CSV here holds the notice, its timeline and past awards.
Where this opportunity stands
Every notice posted under solicitation W911S226U4414 in this department, oldest first.
- Sep 4, 2026 · this noticeCombined Synopsis/Solicitation
- Sep 8, 2026Combined Synopsis/SolicitationOpen
Next steps for this stage
Standard steps for the notice type; not advice about this buyer.
- Decide bid or no bid before the response deadline.
- Look at the past winners for likely competitors and teaming partners.
- Follow the opportunity to hear about amendments and the award.
What the notice says
Item 1 - Thurmaduke Cold Food Unit, mobile, 74 inches W x 32 inches Dx 36 inches H, NSF 7 stainless steel mechanical cold pan, 8 inches deep, touchscreen control , 70-1/2 inches x 21-3/4inches liner, 1 inches drain line and valve, hinged paint grip steel louvered grill, paint grip steel body and undershelf, 5 inches dia. swivel casters and brakes, 120v/60/1-ph, 6.9 amps, NEMA 5-15, cULus, UL EPH Classified 2 ea. 217101 Semi-Gloss Black (RAL 9004),powder coat paint finish 2 ea. MOD-14-5 14ga stainless steel top, in lieu of standard 2 ea. ILD Internal Locking Device (on both ends), stainless ste… (show all)
el pin and latch line up device under countertop, per unit price. 2 ea. SOLID-HD-5CU Tray Slide, customers side, 74inches W x 12-1/4 inches D, solid stainless steel, on hinged brackets, with (2) 1/8 inches die-formed rubbing tracks, and mounted 34 inches high. 2 ea. 329-3PG-LK Sliding doors, with lock and keys, paint grip steel to match body, recessed stainless steel pull 2 ea. TS482-74 Contemporary Food Shield, 73-1/2 inches W x 18-1/2 inches D x 20-1/8 inches H, self-service, single shelf, sloped fixed guard with fixed end closures, 3/8 inches glass over shelf and guard with 1/4 inches glass ends (tempered with polished rounded edges), 1 inches tube posts, stainless steel finish posts 2 ea. SCPC Standard Color Powder Coat Paint 6 ea. LOGO Peel and cling type graphics, high resolution image ON CUSTOMERS SIDE AND ENDS.Item 2 - Thurmaduk Ganged Waterless Well, mobile, electric, 74 inches W x 32 inches D x 36 inches H, 1 (5) stainless steel heat wells, touch screen controls, paint grip steel body and undershelf, dish shelf, 5 inches dia. swivel casters with brakes, 6 Ft cord and plug, cULus, UL EPH Classified 2 ea. TWHF74-208 208v/60/1-ph, 12.5 amps, NEMA6-20 2 ea. 217101 Semi-Gloss Black (RAL 9004), powder coat paint finish 2 ea. MOD-14-5 14ga stainless steel top, in lieu of standard 2 ea. ILD Internal Locking Device (on both ends), stainless steel pin and latch lineup device under countertop, per unit price (Note: Units required to be portable) 2 ea. MOD-FCR Flat control rail 2 ea. SOLID-HD-5CU Tray Slide, customers side, 74 inches W x 12-1/4 inches D, solid stainless steel, on hinged brackets, with (2) 1/8 inches die-formed rubbing tracks, and mounted 34 inches high (specify any special height) 2 ea. 328PG-OP-5-LK Sliding doors, operators side, with lock and keys, paint grip steel to match body, and recessed stainless steel pull 2 ea. TS482-74Contemporary Food Shield, 73-1/2 inches W x 18-1/2 inches D x 20-1/8 inches H, self-service, single shelf, sloped fixed guard with fixed end closures, 3/8 inches glass over shelf and guard with 1/4 inches glass ends (tempered with polished rounded edges), 1 inch tube posts, stainless steel finish posts 6 ea. LOGO Peel and cling type graphics, high resolution image ON CUSTOMERS SIDE AND ENDS.Item 3 - Thurmaduke Solid Top Unit, mobile utility counter, 74 inches W x 32 inches D x 36 inches H, 20ga paint grip steel body and undershelves, 5 inches dia. gray poly swivel casters and brakes, NSF 2 ea. 217101 Semi-Gloss Black (RAL 9004), powder coat paint finish 2 ea. MOD-14-5 14ga stainless steel top, in lieu of standard 2 ea. ILD Internal Locking Device (on both ends), stainless steel pin and latch line up device under countertop, per unit price (Note: Units required to be portable) 2 ea. SOLID-HD-5CU Tray Slide, customers side, 74 inches W x 12-1/4 inches D, solid stainless steel, on hinged brackets, with (2) 1/8 inches die-formed rubbing tracks, and mounted 34 inches high (specify any special height) 2 ea. MOD Enclosed rear 8 ea. LOGO Peel and cling type graphic, high resolution image ON ALL SIDESItem 4 - Thurmaduke Solid Top Unit, mobile utility counter, 32 inches W x 32 inches D x 36 inches H, 20ga paint grip steel body and undershelves, 5 inches dia. gray poly swivel casters and brakes, NSF 2 ea. 217101 Semi-Gloss Black (RAL 9004), powder coat paint finish 2 ea. MOD-14-2 14ga stainless steel top, in lieu of standard 2 ea. ILD Internal Locking Device (on both ends), stainless steel pin and latch line up device under countertop, per unit price (Note: Units required to be portable) 2 ea. MOD Enclosed rear 8ea. LOGO Peel and cling type graphic, high resolution image ON ALL SIDES.Item 5 - Thurmaduke Solid Top Unit, mobile utility counter, 46 inches W x 32 inches D x 36 inches H, 16ga stainless steel top, 20ga paint grip steel body and undershelves, 5 inches dia. gray poly swivel casters and brakes, NSF 2 ea. 217101 Semi-Gloss Black (RAL 9004), powder coat paint finish 2 ea. MOD-14-3 14ga stainless steel top, in lieu of standard 2 ea. ILD Internal Locking Device (on both ends), stainless steel pin and latch line up device under countertop, per unit price (Note: Units required to be portable)2 ea. SOLID-HD-3CU Tray Slide, customers side, 46 inches W x 12-1/4 inches D, solid stainless steel, on hinged brackets, with (2) 1/8 inches die-formed rubbing tracks, and mounted 34 inches high 2 ea. MOD Enclosed rear 8 ea. LOGO Peel and cling type graphic, high resolution image required ON ALL SIDESItem 6 - Thurmaduke Solid Top Unit, mobile utility counter, 46 inches W x 32 inches D x 36 inches H, 20ga paint grip steel body and undershelves, 5 inches dia. gray poly swivel casters and brakes, NSF 1 ea. 217101 Semi-Gloss Black (RAL 9004), powder coat paint finish 1 ea. MOD-14-3 14ga stainless steel top, in lieu of standard 1 ea. ILD 1 each Internal Locking Device (on both ends), stainless steel pin and latch line up device under countertop, per unit price (Note: Units required to be portable) 1 ea. SOLID-HD-3CU Tray Slide, customers side, 46 inches W x 12-1/4 inches D, solid stainless steel, on hinged brackets, with (2) 1/8 inches die-formed rubbing tracks, and mounted 34 inches high 1 ea.CUT-OP3 Rectangular cutout with reinforced edges, in countertop, body panel or a shelf, countertop max. right to left is 4 inches less than unit length (specify cutout size and location) CUTOUT IN TOP FOR DRIP TROUGH 1 ea. MOD Enclosed rear 4 ea. LOGO Peel and cling type graphic, high resolution image required ON ALL SIDES 1 ea. Custom1 inches deep stainless-steel Drip Trough 32 inches long unit. Item 7 - Thurmaduke Skeleton Unit, up to 48 inches W x 4 inches D x 36inches H, for opening in counter line up, 16ga stainless steel top cap, 20ga paint grip steel front panel, 6 inches high stainless-steel legs and adjustable feet, must be attached to another unit, casters not available 10 ea. TS380-6PG Each additional 6 inches of length, 120 inches maximum, must be supported both ends, specify exact opening length allowing inside clearance. MODIFY TO 9 Ft. (108 inches) LENGTHTO COVER (2) 36 inches GRIDDLES 1 ea. 217101 Semi-Gloss Black (RAL 9004), powder coat paint finish 2 ea.TS381-PG Thurmaduke Skeleton End Return Panel, 32 inches W x 4-1/2 inches W x 36inches H, 16ga stainless steel top cap, 20ga paint grip steel end panel, 6 inches high stainless-steel legs and adjustable feet, must be attached to skeleton, casters not available**ON BOTH ENDS** 1 ea. MOD-12-46 EXTEND DEPTH OF TOP TO 6 inches ALLTHE WAY AROUND 10 ea. MOD-12 Additional 6 inches of length 1 ea. MOD-14-3 14gastainless steel top, in lieu of standard 10 ea. MOD-14 Additional 6 inches of length 1 ea.SOLID-HD-2CU Tray Slide, customers side, 32 inches W x 12-1/4 inches D, solid stainless steel, on hinged brackets, with (2) 1/8 inches die-formed rubbing tracks, and mounted 34 inches high (specify any special height) 10 ea. SOLID-HD Added 6 inches of tray slide on hinged brackets, solid stainless steel, (2) 1/8 inches die-formed rubbing tracks, mounted 34 inches high (specify any other height), NSF 1 ea. E-OP2 Electric outlet, mounted in base, with galvanized junction box, duplex or single receptacle and stainless-steel cover, wired to existing power source 1 ea. CORD-10 10 ft. cord and plug 1 ea. TS482-88 Contemporary Food Shield, 87-1/2 inches W x 18-1/2 inches D x 20-1/8 inches H, self-service, single
Who won similar work
1550 award notices on SAM.gov in the last 24 months. Match: Same agency (Army Mission and Installation Contracting Command (MICC)), any industry: a loose match.
Loose match: same agency, any industry. Read the titles before treating these as competitors.
| Winner | Awards | Value | Last |
|---|---|---|---|
| Aantilia LLC | 39 | $2.4M | Sep 9, 2025 |
| SPACE AGE ENGINEERING, INC | 25 | $16.5M | Sep 29, 2026 |
| Suncore Distribution LLC | 22 | $1.0M | Sep 9, 2025 |
| ALL AMERICAN AA LLC | 17 | $3.4M | Sep 22, 2026 |
| Kijero, LLC | 16 | $1.1M | Sep 9, 2025 |
| FEDERAL CONTRACTS LLC | 14 | $2.3M | Sep 9, 2025 |
| FSR CONSULTING LLC | 14 | $767K | Sep 9, 2025 |
| BRAVO, INC. · $CCZ | 13 | $1.6M | Jul 29, 2026 |
| EPKO SUPPLY INC | 13 | $701K | Sep 9, 2025 |
| GOVCREST INC | 12 | $1.3M | Sep 9, 2025 |
Value counts single-winner awards. "Shared" awards are multiple-award contracts that list every winner with the same total ceiling; that ceiling is not one company's win, so it is not added in.
- Oct 14, 2026TSR SOLUTIONS LLC$331KSnow Removal Services WA069 (MS)
- Oct 14, 2026Omniscape Solutions LLC$68KWI014 SNOW REMOVAL SERVICES
- Oct 14, 2026Pathfinder Secure Systems LLC$127K88th RD Custodial Services at IL068
- Oct 9, 2026HELOAIR, INCORPORATED$1.9MAerial Ignition/Burn
- Oct 6, 2026SOUTHWESTERN INDUSTRIAL CONTRACTORS & RIGGERS, INC.$55KCrane and Rigger Support
- Oct 6, 2026National Restaurant Supply Inc.$928KFort Bliss Kitchen Equipment: Purchase and Installation
- Oct 1, 2026AAROW EQUIPMENT & SERVICES, INC.$2.3MANC Boundary Wall VI Repairs
- Sep 30, 2026Suntiff, LLC$228KLease/Rental Parking Spaces at Phoenix MEPS
- Sep 30, 2026MEDIA PLUMBING & HEATING INC$2.9MFire Prevention and Protection Systems Maintenance and Repairs Service Contract
- Sep 29, 2026I-2-I Solutions, Inc.$2.2MFort Bragg NC Closed Loops Water Testing & Treatment
Competitive landscape
For the 8 most frequent past winners above. Lobbying is matched by the company's exact name or exact ticker; agencies are as named on the filings.
- 0 of these past winners lobbied Army, Dept of (Corps of Engineers) or Army, Dept of (Other) or Natl Guard since 2024 (0 filings)
- 0 of their lobbyists list a past Army, Dept of (Corps of Engineers) or Army, Dept of (Other) or Natl Guard job
- $154K from their corporate PACs since 2024 to members of House Committee on Appropriations, House Committee on Armed Services, Senate Committee on Appropriations, Senate Committee on Armed Services
- 0 foreign-agent (FARA) registrations
Policy around it
Bills the past winners named while lobbying this agency's issues, rules from the department, and executive orders that name the agency, last 12 months.
- 0 bills named on the past winners' lobbying filings
- 32 rules from the department in the last 12 months
- 0 executive orders naming the agency in the last 12 months
Market
For past winners matched exactly to a listed company. Insider trades are open-market buys and sells (Form 4) in the last 90 days, shown as facts; our own study found insiders do not reliably buy ahead of awards.
- 1 of the past winners are listed companies
- 0 insider buys and 0 insider sells at them in the last 90 days
Sources: SAM.gov notices and award notices; Senate LDA lobbying filings; FEC filings; FARA; Federal Register; congress.gov; SEC Form 4. Every row above links to its record.
Companies are matched to tickers by exact name only. A company we could not match shows no market rows; that is a miss, not a finding.