16--BLADE ASSEMBLY,MAIN, IN REPAIR/MODIFICATION OF
NAVSUP (Naval Supply Systems Command) · NAVSUP WEAPON SYSTEMS SUPPORT
Capture briefs (a one-page, shareable copy of this page) are part of Pro. The CSV here holds the notice, its timeline and past awards.
Where this opportunity stands
Every notice posted under solicitation N0038325RN053 in this department, oldest first.
Next steps for this stage
Standard steps for the notice type; not advice about this buyer.
- Decide bid or no bid before the response deadline.
- Look at the past winners for likely competitors and teaming partners.
- Follow the opportunity to hear about amendments and the award.
What the notice says
CONTACT INFORMATION|4|N731.37|M3F|215-697-0370|Leah.L.Brown5.civ@us.navy.mil| This amendment is hereby incorporated to update the following: The following clauses are hereby deleted in its entirety: 52.222-21 52.222-22 52.222-23 52.222-24 52.222-25 52.222-26 52.222-27 52.222-29 The following clauses are hereby incorporated per class deviation (2025-O0003)in its entirety: 52.204-8 Annual Representations and Certifications. Substitute the following paragraphs (c)(1)(xiv) and (xv) for those paragraphsin the provision at Federal Acquisition Regulation (FAR) 52.204-8: ANNUAL REPRESENTATIONS AND CER… (show all)
TIFICATIONS (MAR 2025) (DEVIATION 2025-O0003) 52.212-3 Offeror Representations and Certifications - Commercial Products andCommercial Services. Substitute the following paragraph (d) for that paragraph in the provision atFAR 52.212-3: OFFEROR REPRESENTATIONS AND CERTIFICATIONS COMMERCIALPRODUCTS AND COMMERCIALSERVICES (MAR 2025) (DEVIATION 2025-O0003) 52.212-5 Contract Terms and Conditions Required To Implement Statutes orExecutive Orders Commercial Products and Commercial Services. Substitute the following paragraphs (b)(33), (34), and (e)(1)(ix) and (x) forthose paragraphs in the clause at FAR 52.212-5: CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR EXECUTIVEORDERS COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (MAR 2025) (DEVIATION2025-O0003) Alternate II (MAR 2025) (DEVIATION 2025-O0003). Substitute the followingparagraphs (e)(1)(ii)(I) and (J) for those paragraphs in Alternate II of FAR52.212-5 52.213-4 Terms and Conditions-Simplified Acquisitions (Other Than CommercialProducts and Commercial Services). Substitute the following paragraphs (a)(1)(vii) and (viii) for thoseParagraphs in the clause at Federal Acquisition Regulation 52.213-4: TERMS AND CONDITIONS-SIMPLIFIED ACQUISITIONS (OTHER THAN COMMERCIAL PRODUCTSAND COMMERCIAL SERVICES) (MAR 2025) (DEVIATION 2025-O0003). 52.222-9 Apprentices and Trainees. Substitute the following paragraph (c) for that paragraph in the clause atFederal Acquisition Regulation 52.222-9: APPRENTICES AND TRAINEES (MAR 2025)(DEVIATION 2025-O0003) 52.244-6 Subcontracts for Commercial Products and Commercial Services. Substitute the following paragraphs (c)(1)(xi) and (xii) for those paragraphsin the clause at Federal Acquisition Regulation 52.244-6: SUBCONTRACTS FOR COMMERCIAL PRODUCTS AND COMMERCIAL SERVICES (MAR 2025) (DEVIATION 2025-O0003) ALL OTHER TERMS AND CONDITIONS REMAIN UNCHANGED. THE SOLICITAITON POC IS HEREBY UPDATED FROM: SOLICITATION POC: N731.37 TO: SOLICITATION POC: N732.47 -- EMAIL: DANA.L.SCOTT14.CIV@US.NAVY.MIL IN ADDITION TO THE ABOVE CHANGE, PACKAING IS UPDATED AS FOLLOWS: FROM: VRSN NR PACKAGING LINES 005 N0010001010000000ZZA00A19FFF00014280000312200M 8145016275489 TAPE RIVETS W/ NASHUA 330XPN:1087646,INDOOR STORAGE TO: 006 G N0010001010000000ZZA00A19FFF00014280000312200M 8145016275489 OOR STORAGE O ALL OTHER TERMS AND CONDITIONS REMAIN UNCHANGED. All terms and conditions of BOA N00383-20-G-X901 apply. This is a repair requirement. Repair Turnaround Time (RTAT): the resultant contractual delivery requirementis measured from asset Return to the date of asset acceptance under the termsof the contract. For purposes of this section, Return is defined as physicalreceipt of the F-condition asset at the contractor?s facility as reflected inthe Action Date entry in the Commercial Asset Visibility (CAV) system. Inaccordance with the CAV Statement of Work, the contractor is required toaccurately report all transactions by the end of the fifth regular businessday after receipt and the Action Date entered in CAV must be dated to reflectthe actual date of physical receipt. The Contractor must obtain finalinspection and acceptance by the Government for all assets within the RTATsestablished in this contract. Requested RTAT: 0060 Days Proposals shall reference the proposed RTAT and any capacity constraints. 1. SCOPE 1.1 Articles to be furnished hereunder shall be repaired, tested and inspected in accordance with the terms and conditions specified in the Requirements Section of this document. 1.1.1 Any item contracted for repair SHALL have a Statement of Work to ensure compliance with all repair procedures and requirements. Repair of: BLADE ASSEMBLY,MAIN ;0RH 1615 016938205 H5; NSN , ;06150-09000-048; Part Number, Shall be performed IAW: BLADE ASSEMBLY,MAIN ;The latest revision of technical manual/approved repair procedures; Publication (s). 1.1.2 There will be no repair deviation from the approved written procedures without review and acceptance by the Basic Design Engineer. All requests for Waiver/Deviation shall be via Form 1694 routed throught the Local DCMA/ACO office for review and recommendations via form 1998. 2. APPLICABLE DOCUMENTS - NOT APPLICABLE 3. REQUIREMENTS 3.1 1.0 GENERAL 3.1.1 This Statement of Work (SOW) establishes the criteria for repair and testing /inspection of the subject item. It includes inspection, component repair and replacement,reassembly and testing procedures required to return units back into a servicable condition. 3.2 2.0 DEFINITIONS. 3.2.1 CONTRACTOR: Is defined as the successful offeror awarded a contract, orderor issued a project work order. The term "contract" encompasses a contract, an order, or a project work order. 3.2.2 OVERHAUL: An overhauled part is one which has been disassembled, cleaned, inspected, repaired as necessary (by replacing or repairing all components which have been found to exceed limits established by the repair/overhaul manual) reassembled and tested in accordance with the approved repair/overhaul manual listed in this SOW and returned to a Ready for Issue (RFI) condition (Refer to contract schedule for items to be overhauled). 3.2.3 REPAIR: A repaired part is one which has been restored to a Ready for Issue(RFI) condition (by replacing or repairing those components found to be defective, broken, damaged or inoperative during the initial evaluation and troubleshooting phase) and tested in accordance with the approved repair/overhaul manual listed in this SOW (Refer to contract schedule for items to be repaired). 3.3 3.0 SCOPE 3.3.1 GENERAL. The items to be furnished hereunder shall be overhauled, upgraded,repaired, tested, inspected, and accepted in accordance with the terms and conditions specified in this contract. Unless expressly provided Government Furnished Property, including equipment such as fixtures, jigs, dies, patterns, mylars, special tooling, special test equipment, or any other manufacturing aid required for the repair, manufacture, and/or testing of the subject item(s) will not be provided by the Government and shall be the responsibility of the contractor. The foregoing applies notwithstanding any reference to such equipment or the furnishing thereof that may be contained in any drawing, manual, or specification for the contract items. 3.3.2 REPAIR UPGRADE REQUIREMENTS:The contractor shall provide the necessary facility, labor, materials, parts, and test and tooling equipment required to to return the following items to a Ready For Issue (RFI) condition: BLADE ASSEMBLY,MAIN ;06150-09000-048; P/N, ;1615 016938205; NSN, ;The latest technical manual/approved repair procedures.; Tech Publications 3.3.3 RFI is defined as that condition allowing the items to perform properly and reliably in an operational environment in a manner they were intended to operate.The contractor must perform all repairs/upgrades at the facility identified within this SOW. Repairs performed by the contractor or subcontractor shall be performed in accordance with the specified drawings and repair manual(s). 3.4 Changes to such manuals used for repairs under this contract, or changes to drawings or specifications used in the manufacture of parts utilized in these repairs, require Procuring Contracting Officer (PCO) approval in accordance with the Configuration Management provisions of this Statement of Work or contract. Under no circumstances should the repair
Who won similar work
36 award notices on SAM.gov in the last 24 months. Matched by: Same office (NAVSUP WEAPON SYSTEMS SUPPORT), same product/service code (PSC) 1615.
Single-winner award sizes (36): middle half $407K to $1.5M, median $589K; range $276K to $1000.0M.
| Winner | Awards | Value | Last |
|---|---|---|---|
| SIKORSKY AIRCRAFT CORPORATION · $LMT · $67.6B | 32 | $2.0B | Sep 25, 2026 |
| TRIMAN INDUSTRIES INC | 2 | $2.5M | Sep 10, 2025 |
| GE AVIATION SYSTEMS LLC · $GE · $35.3B | 2 | $816K | Aug 28, 2025 |
Value counts single-winner awards. "Shared" awards are multiple-award contracts that list every winner with the same total ceiling; that ceiling is not one company's win, so it is not added in. Revenue next to a ticker is the company's last annual revenue from its 10-K.
- $LMT reported $67.6B revenue in FY2025. The median single-winner award in these 36 past awards, $589K, is under 0.1% of that. 10-K
- $GE reported $35.3B revenue in FY2025. The median single-winner award in these 36 past awards, $589K, is under 0.1% of that. 10-K
One award's total value against one year of revenue; many awards are paid over several years.
- Sep 25, 2026SIKORSKY AIRCRAFT CORPORATION$2.4M16--DAMPER ASSEMBLY, IN REPAIR/MODIFICATION OF
- Sep 25, 2026SIKORSKY AIRCRAFT CORPORATION$3.9M16--MAIN MODULE
- Aug 25, 2026SIKORSKY AIRCRAFT CORPORATION$413K16--BLADE ROTARY RUDDER
- May 29, 2026SIKORSKY AIRCRAFT CORPORATION$7.2M16--MAIN MODULE
- May 7, 2026SIKORSKY AIRCRAFT CORPORATION$18.6M16--BLADE,ROTARY RUDDER
- Jan 29, 2026SIKORSKY AIRCRAFT CORPORATION$475K16--GEARBOX,ACCESSORY D
- Jan 10, 2026SIKORSKY AIRCRAFT CORPORATION$441K16--BLADE ASSEMBLY,MAIN, IN REPAIR/MODIFICATION OF
- Jan 2, 2026SIKORSKY AIRCRAFT CORPORATION$444K16--SPINDLE ASSEMBLY
- Sep 10, 2025TRIMAN INDUSTRIES INC$766K16--PITCH LOCK ACTUATOR
- Sep 4, 2025TRIMAN INDUSTRIES INC$1.8M16--ACTUATOR,FOLD,MAIN
Competitive landscape
For the 3 most frequent past winners above. Lobbying is matched by the company's exact name or exact ticker; agencies are as named on the filings.
- 1 of these past winners lobbied Navy, Dept of or U.S. Marines since 2024 (9 filings)
- 0 of their lobbyists list a past Navy, Dept of or U.S. Marines job
- $425K from their corporate PACs since 2024 to members of House Committee on Appropriations, House Committee on Armed Services, Senate Committee on Appropriations, Senate Committee on Armed Services
- 0 foreign-agent (FARA) registrations
Policy around it
Bills the past winners named while lobbying this agency's issues, rules from the department, and executive orders that name the agency, last 12 months.
- 8 bills named on the past winners' lobbying filings
- 32 rules from the department in the last 12 months
- 0 executive orders naming the agency in the last 12 months
Market
For past winners matched exactly to a listed company. Insider trades are open-market buys and sells (Form 4) in the last 90 days, shown as facts; our own study found insiders do not reliably buy ahead of awards. A sale marked 10b5-1 was made under a trading plan set up in advance.
- 2 of the past winners are listed companies
- 0 insider buys and 4 insider sells at them in the last 90 days
Sources: SAM.gov notices and award notices; Senate LDA lobbying filings; FEC filings; FARA; Federal Register; congress.gov; SEC Form 4. Every row above links to its record.
Companies are matched to tickers by exact name only. A company we could not match shows no market rows; that is a miss, not a finding.