Yard Diving Tender (YDT) Request for Information (RFI)

urces to build the required YDTs. Please note that only U.S.-built and U.S.-flagged vessels will be considered. The Navy intends to continue recapitalizing its aging fleet and procure YDTs beginning in Fiscal Year 2027. The overall objective of this Request for Information is to conduct and update market research to support preliminary planning for the acquisition of the YDT. The Navy plans to award a contract to one or more builders in FY27 for up to 2 crafts for delivery to the following: Panama City Beach, FL Description & MISSION PROFILE: The YDTs will be used by Naval Diving and Salvage Training Center (NDSTC), including Center for Explosive Ordnance Disposal & Diving (CENEODDIVE) to conduct training in underwater operations to locate, render safe and/or recover submerged objects and ordnance; harbor clearance/search; and expeditionary salvage operations. Through this RFI, the Navy aims to identify potential, commercial or developmental craft designs for the YDTs based on the following characteristics. Potential sources should have the personnel, facilities, technical capability and production capacity to produce up to two (2) YDTs. The Navy is particularly interested in existing, proven vessel designs that meet the following characteristics or that could be modified to meet the following characteristics while maintaining proven hull forms, propulsion systems and other major design features. Key YDT attributes and requirements: length: ?52m (170ft) Beam: ?10m (33ft) Draft: ?3.6m Air Draft: ?15m Cruise speed: ?15 knots (at full load in Sea State 4) Range: ?400 nautical miles at cruise speed Station Keeping: Dynamic Positioning class 2 (DP2) through Sea State 3, Beaufort Force 4 Sea State: Fully mission capable (including station keeping) up to Sea State 3, Beaufort Force 4 Fully mission capable (excluding station keeping) up to Sea State 4, Beaufort Force 5 Capable of restricted operations (transit at cruising speed) up to Sea State 5 Beaufort Force 6 Capable of surviving (maintaining course and heading) up to Sea State 6, Beaufort Force 7 Regulatory Bodies: American Bureau of Shipping (ABS) Marine Vessel Rules, U.S. Code of Federal Regulations (CFR) Title 33 and 46, U.S. Navy Diving Manual Deck Area: ?180 square meters aft of deck house rated to carry payloads with concentrated local loads of up to 1500 kg/square meter Stability: ABS requirements for Intact and Damage Stability Personnel Capacity: ? 50 embarked persons Cranes: Aft deck crane ?4,500 kg at 15 ft past deck edge Spaces (minimum requirement) Diving storage space: below the aft deck approximately 20 ft in length and the full width of the craft at a minimum Pilot House: full 360 degree field of view, command, control and navigation suite Crews Quarters: galley, messing and seating for 8, berthing for 4 Diving locker: ? 20 square meters located on main deck Passenger Space: Seating area with working surface for ?42 persons for instruction and rest. Food storage and prep area and sufficient heads provided within or adjacent An additional 32 square meter enclosed compartment with access to the aft deck Responses & Submission of Information Interested parties are free to submit any information which may assist the Navy in its market research in response to this RFI. Responses to this RFI are limited to 10 pages and should include any relevant drawings, specifications, and/or sketches. The Government is not requesting a formal proposal at this time; however, please include as much of the technical data listed below as practical under the time constraints of this inquiry. As a reminder: please properly mark, clearly identify, and segregate any proprietary information included in your response. The following information is requested: Data and/or information on any vessel or vessel design in a similar size and capability range as that described in the draft specification. Data may be submitted on existing vessels, vessels that are conceptual or in design. If vessel is conceptual or in design, please provide level of maturity. A description of the company�s relevant experience. Past experience performing construction of boats of similar dimensions and characteristics highlighting: construction techniques; portions of work which intended to be performed by the prime contractor and portions of work to be subcontracted, including identification of likely design agent; any intended teaming arrangements; and familiarity with Government contract requirements and drawing development. Examples of successful Government or commercial contracts of similar scope of work. A description of the boat design identified by the Contractor that meets or comes close to meeting the above listed design requirements. If applicable, identify the number of vessels and the years they were delivered. Provide approximate pricing for: Candidate vessel Delivery to stated location Engineering Cost Provide location of company production facilities. Describe facility production capacity (e.g., estimate on total construction time for one (1) YDT; how many YDTs can be built per year), based on current and projected yard-wide workload. The Navy recommends contractors to provide information demonstrating their capability/capacity for production throughput. When describing throughput, please address capability/capacity of facilities and how they are suitable to handle the physical components of the boat, stowage of Government Furnished Equipment (GFE), and the current and projected utilization of workforce and trades required to complete the YDT. The Navy further requests information regarding the estimated maximum production throughput of the boats per year, including constraints from other contracted and projected workload for other project/programs. Additionally, the Navy requests for contractors to state the minimum YDT quantity that would need to be guaranteed to respond to the requirements of the potential solicitation. Interested parties may also submit additional information on the following areas of interest: Vessel principal characteristics and capabilities General arrangement drawings and renderings Design, construction, regulatory and classification standards employed Company production capabilities and recent, relevant, production history Contact information Note: Interested parties do not have to meet all requirements listed in this RFI to submit a response. All responses received will be reviewed by the Government. This RFI constitutes market research being performed under Part 10 of the Federal Acquisition Regulation (FAR) and is not an RFP. The responses shall contain unclassified information only. SUBMISSION INSTRUCTIONS If your organization has the potential capacity to perform the above described efforts, please provide the following information on company letterhead: 1) Organization name, address, e-mail address, web site address, telephone number, and size and type of ownership for the organization; and 2) Tailored capability statements addressing the particulars of this effort, with appropriate documentation supporting claims of organizational and staff capability. If significant subcontracting or teaming (>20%) is anticipated to deliver technical and industrial capability, organizations should address the administrative and management structure of such arrangements. BASED ON THE RESPONSES TO THIS SOURCES SOUGHT NOTICE/