KB DUCTING
Army Mission and Installation Contracting Command (MICC) · W6QM MICC-FT DRUM
Capture briefs (a one-page, shareable copy of this page) are part of Pro. The CSV here holds the notice, its timeline and past awards.
Where this opportunity stands
Every notice posted under solicitation W911S226U4544 in this department, oldest first.
- Sep 23, 2026Combined Synopsis/SolicitationOpen
- Sep 25, 2026 · this noticeCombined Synopsis/Solicitation
Next steps for this stage
Standard steps for the notice type; not advice about this buyer.
- Decide bid or no bid before the response deadline.
- Look at the past winners for likely competitors and teaming partners.
- Follow the opportunity to hear about amendments and the award.
What the notice says
AMMENDMENT 0001 is for mistake on material list. CORRECTION IS 5 EACH 24 INCH CLAMPS...Salient Characteristics Specification: Modular Stainless Steel Ductwork SystemDocument Control Number: SC-DUCT-SS-001Subject: Modular Clamp Together and Flanged Stainless Steel Ducting and ComponentsBasis of Design: KB Duct (CECO Environmental) or Approved Equal1. Scope and PurposeThis document lists the basic physical and operational features needed for industrial grade stainless steel ducting. These parts make up a complete dust, mist, and fume collection system. The modular design allows fast setup, easy … (show all)
layout changes, leak resistance, and corrosion protection. When specific part numbers from KB Duct are referenced, they show the required design standard, build quality, dimensions, and performance. Any substitute items offered must match or exceed these key requirements.1. General System RequirementsAll supplied components must meet the following general standards:Material: All duct pipes, branch pieces, elbows, reducers, sleeves, and hangers must be made from commercial grade Stainless Steel (minimum Grade 304 with mill finish or 2B finish; Grade 316 is also acceptable).Connection Types:Clamp Together (Rolled Edge): Standard straight pipes, branch fittings, reducers, and elbows must have a rolled lip edge on each end. This allows quick connection clamps to join parts together without needing field welding, rivets, or sheet metal screws.Flanged Ends: Select large diameter parts (28 inch duct, branch fittings, and adapter ends) must have factory welded angle or flat flanges with standard bolt holes.Pipe Seams: Straight pipe lengths and fabricated bodies must have smooth, solid, airtight welded seams to stop leaks and keep dust from building up inside.Gasket Materials: Clamps must include chemical and oil resistant Buna-N (Nitrile) seals rated for standard industrial air temperatures. Flanged 28 inch joints must include Neoprene full face or ring gaskets with pre-punched bolt holes matching the flanges.Adjustability: The system must allow quick length adjustments in the field using sliding sleeves and clamping adapters without cutting or damaging permanent pipe sections.1. Item List and Key FeaturesItem 01Reference Part Number: CUSTOMDescription: 28 Inch Stainless Steel Duct (Flanged)Quantity: 20Unit: FTKey Requirements: Nominal 28 inch inside diameter. Shipped as four separate 5 foot flanged pipe sections. Heavy gauge stainless steel. Factory welded companion flanges on both ends with standard bolt holes. Solid airtight longitudinal seam.Item 02Reference Part Number: CUSTOMDescription: 28 Inch 45 Degree Double Lateral Branch (Flanged)Quantity: 1Unit: EAKey Requirements: All-welded stainless steel construction. Dimensions: main inlet 28 inches by main outlet 24 inches by branch one 12 inches by branch two 12 inches. 45 degree lateral branch angles for smooth airflow. Flanged ends matching the 28 inch duct interface.Item 03Reference Part Number: CUSTOMDescription: 28 Inch Forever Clamps and GasketsQuantity: 4Unit: EAKey Requirements: Heavy duty stainless steel clamp built for 28 inch connections. Fitted with a Buna-N rubber gasket. Includes companion Neoprene flange gaskets punched with holes matching the 28 inch flange.Item 04Reference Part Number: 10024SSDescription: 24 Inch Stainless Steel Duct, 5 Feet LongQuantity: 3Unit: EAKey Requirements: Nominal 24 inch inside diameter, 5 feet long. Stainless steel body with rolled lips on both ends. Continuous solid welded seam.Item 05Reference Part Number: CUSTOMDescription: 24 Inch 45 Degree Double Lateral BranchQuantity: 1Unit: EAKey Requirements: All-welded stainless steel modular branch fitting. Dimensions: 24 inch inlet by 18 inch outlet by dual 12 inch branch taps. Rolled lips on all 4 connection ends. 45 degree entry angle on both 12 inch branch ports.Item 06Reference Part Number: CUSTOMDescription: 24 Inch 45 Degree Lateral BranchQuantity: 1Unit: EAKey Requirements: All-welded stainless steel single branch fitting. Dimensions: 24 inch inlet by 24 inch straight run by 12 inch branch tap. Rolled lips on all 3 connection ends. 45 degree branch angle for low air resistance.Item 07Reference Part Number: 11024SSDescription: 24 Inch Adjustable Sleeve (11 Inch Length)Quantity: 1Unit: EAKey Requirements: Sliding sleeve mechanism sized for 24 inch duct. 11 inches overall length. Stainless steel; slides over straight pipe for telescoping fit without field welding. Clamps tightly using standard modular clamps and sealing rings.Item 08Reference Part Number: 13024SSDescription: 24 Inch Forever ClampQuantity: 1Unit: EAKey Requirements: Modular duct clamp for 24 inch rolled lip pipe. Stainless steel band, hinge pin, and latch. Fitted Buna-N gasket for an airtight perimeter seal. Quick latching mechanism.Item 09Reference Part Number: 17024SSDescription: 24 Inch Saddle HangerQuantity: 2Unit: EAKey Requirements: Hat style support hanger shaped for 24 inch outside diameter duct. Heavy gauge stainless steel. Pre-punched mounting holes for threaded support rods.Item 10Reference Part Number: 10018SSDescription: 18 Inch Stainless Steel Duct, 5 Feet LongQuantity: 2Unit: EAKey Requirements: Nominal 18 inch inside diameter, 5 feet long. Rolled lip ends with continuous welded longitudinal seam. Sturdy stainless steel build.Item 11Reference Part Number: CUSTOMDescription: 18 Inch 45 Degree Double Lateral BranchQuantity: 1Unit: EAKey Requirements: All-welded stainless steel branch fitting. Dimensions: 18 inch inlet by 16 inch outlet by dual 12 inch branch taps. Rolled lip modular connections on all ports. 45 degree lateral branch takeoff angles.Item 12Reference Part Number: 11018SSDescription: 18 Inch Adjustable Sleeve (11 Inch Length)Quantity: 1Unit: EAKey Requirements: Telescoping sleeve sized for 18 inch duct, 11 inches long. Stainless steel; provides easy length adjustment. Matches 18 inch rolled lip clamp fittings.Item 13Reference Part Number: 13018SSDescription: 18 Inch Forever ClampQuantity: 4Unit: EAKey Requirements: Quick clamping ring for 18 inch rolled lip duct. Stainless steel construction with Buna-N seal. Toggle latch with safety locking pin.Item 14Reference Part Number: 17018SSDescription: 18 Inch Saddle HangerQuantity: 2Unit: EAKey Requirements: Hat style support hanger shaped for 18 inch duct exterior. Stainless steel; cradles duct without crushing or bending the pipe wall.Item 15Reference Part Number: 10016SSDescription: 16 Inch Stainless Steel Duct, 5 Feet LongQuantity: 2Unit: EAKey Requirements: Nominal 16 inch inside diameter, 5 feet long. Rolled lip ends on both sides with solid welded seam. Corrosion resistant stainless steel.Item 16Reference Part Number: 11016SSDescription: 16 Inch Adjustable Sleeve (11 Inch Length)Quantity: 1Unit: EAKey Requirements: Sliding sleeve for 16 inch duct, 11 inches long. Allows telescoping length adjustment; rolled lip on the receiver end. Stainless steel construction.Item 17Reference Part Number: 14216.45SSDescription: 16 Inch by 12 Inch by 12 Inch Y BranchQuantity: 1Unit: EAKey Requirements: Symmetrical split Y-branch fitting. One 16 inch inlet splitting into two 12 inch branch outlets at 45 degree angles. All-welded stainless steel with rolled lips on all 3 ends.Item 18Reference Part Number: 13016SSDescription: 16 Inch Forever ClampQuantity: 4Unit: EAKey Requirements: Heavy duty stainless steel clamp for 16 inch rolled lip duct. Factory installed Buna-N gasket for a tight seal under suction or pressure.Item 19Reference Part Number: 17016SSDescription: 16 Inch Saddle HangerQuantity: 2Unit: EAKey Requirements: Hat style bracket shaped for 16 inch duct diameter. Stainless steel; supports pipe from ceiling or overhead channel struts.Item 20Reference Part Number: 16014SSDescription: 14 Inch to 12 Inch ReducerQuantity: 12Unit: EAKey Requirements: Smooth tapered duct reducer. Large end: 14 inch inside diameter; Small end: 12 inch inside diameter. Rolled lip ends on both ends for clamp connect
Who won similar work
7 award notices on SAM.gov in the last 24 months. Match: Same agency (Army Mission and Installation Contracting Command (MICC)), same industry group (NAICS 3323).
| Winner | Awards | Value | Last |
|---|---|---|---|
| YOSWAY MARK P Estero FL 33928 USA | 2 | $83K | Jun 3, 2025 |
| TAZA SUPPLIES INC | 1 | $140K | Jun 10, 2025 |
| ALTERNATIVE LOGISTICS LLC | 1 | $32K | Sep 9, 2025 |
| UNITY CABLE TECHNOLOGIES INC | 1 | $29K | Mar 3, 2025 |
| Suncore Distribution LLC | 1 | $29K | Aug 21, 2025 |
| BHAYANA BROTHERS LLC | 1 | $22K | Apr 7, 2025 |
Value counts single-winner awards. "Shared" awards are multiple-award contracts that list every winner with the same total ceiling; that ceiling is not one company's win, so it is not added in.
- Sep 9, 2025ALTERNATIVE LOGISTICS LLC$32KMaintenance Stand
- Aug 21, 2025Suncore Distribution LLC$29KStorage Shelters
- Jun 10, 2025TAZA SUPPLIES INC$140KChain Hoist
- Jun 3, 2025YOSWAY MARK P Estero FL 33928 USA$42KDUMPSTERS FORT BRAGG
- May 7, 2025YOSWAY MARK P Estero FL 33928 USA$41KDUMPSTERS
- Apr 7, 2025BHAYANA BROTHERS LLC$22K18 ftx13 ft Duracoil Rolling Steel Door
- Mar 3, 2025UNITY CABLE TECHNOLOGIES INC$29KStorage Shelters
Competitive landscape
For the 6 most frequent past winners above. Lobbying is matched by the company's exact name or exact ticker; agencies are as named on the filings.
- 0 of these past winners lobbied Army, Dept of (Corps of Engineers) or Army, Dept of (Other) or Natl Guard since 2024 (0 filings)
- 0 of their lobbyists list a past Army, Dept of (Corps of Engineers) or Army, Dept of (Other) or Natl Guard job
- No corporate PAC money from them to the overseeing committees since 2024
- 0 foreign-agent (FARA) registrations
Policy around it
Bills the past winners named while lobbying this agency's issues, rules from the department, and executive orders that name the agency, last 12 months.
- 0 bills named on the past winners' lobbying filings
- 32 rules from the department in the last 12 months
- 0 executive orders naming the agency in the last 12 months
Market
For past winners matched exactly to a listed company. Insider trades are open-market buys and sells (Form 4) in the last 90 days, shown as facts; our own study found insiders do not reliably buy ahead of awards.
- 0 of the past winners are listed companies
- 0 insider buys and 0 insider sells at them in the last 90 days
Sources: SAM.gov notices and award notices; Senate LDA lobbying filings; FEC filings; FARA; Federal Register; congress.gov; SEC Form 4. Every row above links to its record.
Companies are matched to tickers by exact name only. A company we could not match shows no market rows; that is a miss, not a finding.